Charnwood VIPER2#IN Thread Adaptor Insert 3/4'' x 16tpi to 1'' x 8 tpi 447JAT) needs to be fitted

447JAT) needs to be fitted to the platform

A good quality tailstock live centre is an essential accessory when turning between centres

the TurnMaster has been a huge success with both novices and experienced turners

This faceplate ring is ideal for holding small to medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber

Expansion: 28 - 45 mm

Charnwood VIPER2#IN Thread Adaptor Insert 3/4'' x 16tpi to 1'' x 8 tpi 447JAT) needs to be fittedHeadstock thread adaptor. To fit onto a lathe with 3 4" x 16tpi headstock thread. To mount a scroll chuck (or face plate) with 1" x 8tpi thread. Suitable for use with Charnwood Scroll Chucks Viper2 and W830. Plus any other brand with a 1" x 8tpi thread. Specification Adaptor Type Insert Overall Length 32mm External Thread Size (Chuck) 1" x 8tpi External Thread Length 22mm Internal Thread Size (Lathe) 3 4" x 16tpi Internal thread Length 25mm Register